How to program vag 4th 5th IMMO by Xtool X100 PAD 2 full set?

Xtool X100 PAD 2 full set is verified to program key for VAG 4th 5th IMMO by working with an extra Special adapter named Xtool KC100. X100 PAD 2 standard set is optional to choose vag 4th 5th IMMO programming function.






Here you can see I am testing with Xtool X100 PAD 2 full set and Xtool KC100:









Here XTOOL X100 PAD2 Full set with the special Adapter for 4th 5th immo:






Here XTOOL X100 PAD2 Full Set special Adapter for 4th 5th immo

Xtool X-100C Program Keys for Ford Edge 2015

The Xtool X100C is a perfect iOS and Android based key programmer and pin code reader which is specialized for Ford, Mazda, Peugeot and Citroen. This article will teach you how to program Ford Edge 2015 key via X100C. Hope it helps!

Equipment needed:
*Xtool X100C Auto key programmer
*iPhone
*Remote blank Keys
Vehicle model:
Ford Edge 2015

Remote Blank Keys


First of all, Enter the Bluetooth setting and pair the iPhone Bluetooth with X100C, if you don’t know how to do this, see the User Manual:
Xtool-x100-c-user-manual.pdf

Click to enter [Immobilizer] option

Then choose [Ford]-> [China Ford]-> [Smart Key System]->[Edge]->[2015-]


Then turn on the ignition switch and press OK to continue

Choose [Add a key]

Then open the hazard warning light and press OK to continue

And open the driver door then close the driver door
Then turn off the ignition switch and press OK

It is communicating…

The key into the card slot, Press OK

Done! A key has been programmed success!

To program the next remote key, press YES
Put another key into the card slot, Press OK
Done!

For more information about Xtool X100C (such as supported car list), click the link:
http://www.uobdii.com/wholesale/xtool-x-100-c-for-ios-and-android-auto-key-programmer.html

From UOBDII Official Blog, post How to Program Keys for Ford Edge 2015 using Xtool X-100C?

Xtool X100C iOS Android based – best key programmer & pin code reader for Ford Mazda Peugeot Citroen

Xtool X100C, iOS & Android based, is the newly release locksmith tool by Xtool Company. It is designed to match key by OBD and read pin code via dongle on Ford and Mazda, Peugeot and Citroen. It can communicate via Bluetooth which is very easy to use. Moreover, it is available to update on x100C APP.

Following post starts with Xtool X100C details, then how to use Xtool X100C to program key on Android device, and ends up with how to use Xtool X100C to program key on IOS device.

Part 1: Xtool X100C details
Xtool X100C Outlook:

X100C Indicator and connector:
① Power Indicator: It turns green when power is on.
② Bluetooth Indicator: It turns red when Bluetooth is not connected; it turns blue when Bluetooth is connected successfully.
③ Vehicle Indicator: When X100C is connected with vehicle successfully, it turns green.
④ DB15 connector:  Connect the vehicle via test cable.

IOS and android Based:

Apple iOS (Requires iOS4.3 or later)
Device: IPod touch
Mode: iPod Touch 1st  generation,  2nd  generation, 3rd  generation, 4th generation

iPhone mode: iPhone, iPhone 3, iPhone 3GS, iPhone 4, iPhone4s, iPhone 5, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iphone 7, iphone 7

Pad mode: iPad, iPad 2, ipad 3, iPad air, iPad Mini 1, iPad Mini 2,
OS: Android (Requires OS2.3 or later). Mode: ll android smart phone and tablet
Where to download APP:
X-100 C (search and download it from Apple store and GooglePlay Store)

X100C Bluetooth: Once the Bluetooth is paired, the device will reconnect with your phone automatically.

X100C free update: Download latest XtoolC App with new features from Google Play or Apple Store.

X100C Language: English only, more language will be available.

Here is a little part of X100C Pin code reading list, more models will be tested and added here:

Auto Maker	Model	Year	Chip Type	Remarks
Mazda	CX-3	2015+	smart PCF7953 ID46
Mazda	CX-3	2012+	smart PCF7953 ID46
Mazda	2	2014+	smart PCF7953 ID46
Mazda	3	2013+	smart PCF7953 ID46
Mazda	6	2013+	smart PCF7953 ID46
Mazda	2	2002 – 2013	4D ID63
Mazda	3	2002 – 2012	4D ID63
Mazda	5	2002 – 2012	4D ID63
Mazda	6	2014 – 2012	4D ID63
Ford	Focus3/Cmax	2010+ –	DST80+	mechanical
Ford	Focus3/Cmax	2010+ –	DST80+
Ford	Kuga2	2014+ –	DST80+	mechanical
Ford	Kuga2	2014+ –	DST80+
Ford	MondeoMK4/SMax facelift	2010+ –	DST80+	mechanical
Ford	MondeoMK4/SMax facelift	2010+ –	DST80+
Ford	Fiesta	2014+ –	DST80+	only mechanical
Ford	Bmax			only mechanical
Ford	Custom			only mechanical, not fully supported
Ford	Fiesta
Ford	Bmax
Ford	Ecosport
Peugeot	1007
Peugeot	206
Peugeot	207
Peugeot	208
Peugeot	2008
Peugeot	301
Peugeot	306
Peugeot	307
Peugeot	308
Peugeot	3008
Peugeot	406
Peugeot	407
Peugeot	4007
Peugeot	508
Peugeot	5008
Peugeot	607
Peugeot	806
Peugeot	807
Peugeot	Bipper
Peugeot	Expert
Peugeot	Partner
Citroen	C2
Citroen	C3
Citroen	C3 Picasso
Citroen	C3 Pluriel
Citroen	C4 Cactus
Citroen	C4 Picasso
Citroen	C5
Citroen	C8
Citroen	C-Elysee
Citroen	xsara Picasso
Citroen	Berlingo 2
Citroen	Berlingo 3
Citroen	Jumper
Citroen	Jumpy
Citroen	DS3
Citroen	DS4
Citroen	DS5

Part 2: How to use Xtool X100C to program key on Android device?

1.Go to X100C menu

2.Active:

Input the serial number and press “Activate”.

3. Settings:

Enter the Bluetooth setting and pair the phone Bluetooth with X100C -xxxxx Bluetooth

– PDF: input and store user’s information to be printed in the PDF report.
– About: Users can read the software version and serial number here.

4. Enter Immobilizer and choose car model to program key.

Part 3: How to use Xtool X100C to program key on IOS device?

1. Go to X100C menu
2. Activate:
3. Click “Immobilizer” and choose brand, then the regional market, then model then year.

How to set the Bluetooth?
You have to set the Bluetooth before you start. Here are steps
Step 1: Open your iPhone’s setting ->Bluetooth ->choose the one same as your device


Step 2: Check in the settings in the app to see if it is connected successfully.

From UOBDII Official Blog, post Xtool X100C iOS Android based – best key programmer & pin code reader for Ford Mazda Peugeot Citroen

Xtool VAG401 VW/AUDI/SEAT/SKODA Scan tool Review

I received my Xtool VAG401 scanner recently around $40 with $29.5 shipment to my place. Tried it out straightly on my 2005 Passat and found it quite easy to use. If you have used VCDS VAG COM cable, you can probably figure out how to use this without reading the manual!

They include a reader. They also include a USB cable. The only use I have seen for the cable is to power up the unit from a USB port instead of your car. It is hand-held diagnostic tool with 160*160 LCD screen and no need to use a laptop or computer when diagnosing.
More Products info,you would better to visit:https://www.xtooleshop.com

The OBDII 16PIN cable that hooks between the XTOOL VAG401 scan tool and the car is a straight thru cable. There are no components in the back shell of the OBDII connector. The other end has a 15 pin male d-sub connector.

I was able to use mine to read out the key code from the dash. I verified that it was the same as one I had gotten previously from VAG-Tacho. It reads error codes just like VCDS, although there is no autoscan function to scan all modules that I can find. It has successfully found all installed features on both my Passat and my friend’s Audi Allroad. Both of cars are dual k not CANbus. I have not tried it on CANbus car yet.

The best way I can describe the interface to the modules is the older VCDS lite interface. The original modulemenus were almost a copy of VCDS, although the latest update simplified them somewhat.

It supposedly can match keys to the dash / immobilizer, although I have not tried it. It has a few other functions that VCDS does not have, such as mileage changes, oil reset, SRS reset etc. It can code modules, do adaptations, etc.

I figured out to update mine. Download the update application from the xtool website, and use the VAG401 serial number as the user name, and the password from the about screen as the password. You do not need to register. I downloaded the updates, and it said the update was successful. When I started the diagnosis, it loaded a new .bin file. Menus changed somewhat, and new options were added.

I got it in a couple of days. If you travel a lot, you can keep it in the car. You do not need a computer or power supply to use it, which is convenient. I can’t speak for how well it works on other cars but works fine on my 2005 Passat.

Article from: http://blog.uobdii.com/xtool-vag401-vwaudiseatskoda-scan-tool-review/

Xtool PS2/ PS90 GDS Gasoline Mercedes-Benz V16.21

XTOOL PS2/ PS90 GDS Gasoline for Mercedes truck is updated to 16.21 version. Here’s all the new information for PS2/ PS90 GDS v16.21 and step-by-step PS2 v16.21 update instruction is here.

 New languages available:
English, Russian, Simplified Chinese, Traditional Chinese, Spanish,
 German, French, Portuguese, Italian, Dutch, Arabic, Farsi (newly added)

Xtool X-100 PAD Special Functions List (Expert) Free Download

This is about X-100 PAD diagnostic tablets special functions. Click to download here. Enjoy!

– Immobilizer / key programming
– Odometer correction / change km
– Oil reset
– Eeprom:

XTOOL PS201 Heavy Duty Scan Tool Trucks and Buses

XTOOL mini obd2 scanner support trucks?? NO!!  you should use the “PS201 Heavy Duty Scan Tool“, which was specifically designed and built to diagnose OBDII / EOBD / CAN BUS complaint trucks and buses from 1996 and up, and provides an affordable solution for truck and bus diagnostics.

Xtool truck & bus code reader at: http://www.uobdii.com/wholesale/xtool-ps201-heavy-duty-code-reader.html

Xtool EZ400 vs PS2 GDS vs Autel MS906 vs DS708

XTOOL EZ400 diagnostic tablet comes at uobd2 to replace PS90, and Autel MS906 comes also here to replace DS708. Here is the comparison tablet of Xtool EZ400, PS2 GDS, Autel MS906, DS708.

Xtool X100 Pad Tablet Active Procedure

About Xtool X100 Pad Tablet

The first tablet key programmer in the word. Xtool X100 PAD performs key programming, mileage adjustment, oil service light reset, timing belt service light reset, tire pressure warning light reset , EPB reset, throttle body reset, DPF reset, battery reset, steering angle calibration and OBD-II engine diagnosis.

Xtool X-100 PAD Activation 

Xtool EZ300 and Xtool EZ400 which one is cost-effective?

Xtool company released XTOOL EZ400 and EZ300 diagnosis tool with multi-touch screen to diagnose almost cars in the world. Here is a comparison of XTOOL EZ400 FULL systems & EZ300 FIVE systems.

How To Register Autel Maxisys MS906 Diagnostic Scanner

Original AUTEL MaxiSYS MS906 Auto Diagnostic Scanner is the updated Version of Autel MaxiDAS DS708 on Android Operating system

In order to get access to the Support platform and obtain update and other services from Autel, you are required to register the Autel MaxiSys MS906 Diagnostic System the first time you use it.

To register the Autel MS906 diagnostic scanner:

1. Visit the website: http://pro.autel.com.

2. On the Sign In page, input your account ID and other information to log in, if you already have an account.

3. If you are a new member to Autel and do not have an account yet, click the Create Autel ID button on the left side.

4. Enter the required information in the input fields, read through Autel’s Terms and Conditions and tick on Agree, and then click Create Autel ID at the bottom to continue.

5. The online system will automatically send a confirmation email to the registered email address. Validate your account by clicking the link provided through the mail. A product registration screen opens.

6. Find out the device’s serial number and password from the About section of the Settings application on the display tablet.

7. Select the product model of your device, enter the product serial number and password on the Product Registration screen, and click Submit to complete the registration procedure.

How much do you know XTOOL X-100 PAD Tablet Key Programmer?

Here, obdtool will introduce the tablet key programmer X100 PAD in detail, including 4 parts:

Function;

Setting;

Diagnosis report;

Update.

Hope this helps you all.

X100 pad functions:

* Key programming

* Service light reset

* Tooth lean

* ABS bleeding

* Types pressure reset

* ECU reset

* Exhaust gas treatment

* Odometer Adjustment

* Steering Angle Calibration

* EPB Electrical Parking Brake Adaptation 

* TPS Throttle Body Adaptation

* EEPROM adapter

* Oil Reset/Engine oil light reset

* Timing belt light reset (Manual Operation)

* Battery Reset

* PIN Code Reading

* Hexadcimal editor(Win Hex)

* OBDII Diagnosis

* DPF functio 

* Steering Angle Calibration

* EPB Electrical Parking Brake Adaptation 

* TPS Throttle Body Adaptation

* EEPROM adapter

* Support the latest vehicles with CAN BUS and UDS protocol

* Update Via WIFI (always equip your device with the latest software)

......

What’s the vehicle coverage in each function?

Please go to  http://www.uobdii.com/wholesale/xtool-x-100-pad-tablet-key-programmer.html

X-100 PAD Setting:

X100 PAD settings include language, unit, Bluetooth, self test.

-Language setting:

-UNIT setting:

-self test:

Users can send the X100 pad to the factory if the self test fails.

X-100 tablet diagnosis report:

The diagnostic report provides vehicle maintenance documents including Automotive Technical Manuals, Maintenance Cases, Circuit Diagram, Common Trouble Codes, etc.

XTOOL X100 PAD update: 

XTOOL X100 pad update directly via Internet using WIFI or wired connection. To access the update application, open X100 pad application and click UPATE.

Read more: 

http://www.uobdii.com/wholesale/xtool-x-100-pad-tablet-key-programmer.html 

XTOOL X-100 PAD, any good?

Want to buy an original XTOOL X100 PAD, but is it any good?

Sources from XTOOL factory are here.

(original x-100 pad is authorized to obd2 express, you can refer here also

 http://www.uobdii.com/wholesale/xtool-x-100-pad-tablet-key-programmer.html)